The promotional products industry measures itself in distributor sales. PPAI’s 2025 U.S. Distributor Sales Volume Estimate put that number at $27.1 billion, up just 1.3% on the year before.
Not factory sales. Not retail sales. Distributor sales. The whole industry is measured at this one layer.
So if you buy branded merchandise, you are almost certainly buying through a distributor. That makes one question worth getting straight before you sign anything: what does a promotional products distributor actually do, and is this the right layer for your order?
A promotional products distributor is a company that buys blank goods from suppliers, adds your logo, and sells you the finished item. They usually do not own the factory. They own the sourcing knowledge, the artwork handling, and the delivery risk.
Here is the part nobody tells you. That word means four different things. Three of them are written into law, and only one of them decides who pays when a shipment goes wrong.
What Is a Promotional Products Distributor?
The Advertising Specialty Institute (ASI) is the largest membership body in this industry. Its own glossary puts it plainly: a distributor is an intermediary that purchases goods from suppliers and then sells them to end-buyers.
The chain runs in one direction:
Supplier → distributor → end-buyer → end user
The supplier makes or imports the blank product. They set the net price, the minimum order, and the lead time. The distributor buys at that net price, arranges the decoration, and sells you the printed item. You hand it out.
ASI lists what distributors do for you: campaign ideas, product samples, virtual mockups with your logo, order and production management, quality checks, and shipping.
Put less politely: a distributor sells you the difference between a catalogue and a finished box on your dock. That difference is real. It is also not free.
Does “Distributor” Mean the Same Thing Everywhere?
No. And this is where buyers get hurt.
The word is used in four separate systems. Each one draws the line in a different place. Only one of them is about your invoice. The other three are about liability.
| Who is using the word | What it means | What it decides |
|---|---|---|
| The promo industry (ASI) | Buys from suppliers, sells to end-buyers | Who gets net wholesale pricing |
| US product safety law (CPSC) | Sells and delivers the decorated product to the final customer | Who signs the Children’s Product Certificate |
| EU product safety law (GPSR) | Anyone in the chain who is not the maker or the importer | Who must be the responsible economic operator in the EU |
| A factory in China | A dealer who wants exclusive rights in a country | Territory lock-up, rebates, who you may not sell to |
Read that table twice. Under ASI’s meaning, the distributor is the friendly face on your side of the table. Under CPSC’s meaning, the distributor can be the party that finished the product — and therefore the party on the hook.
One more trap. If you landed on this page looking for a beer distributor — the company that moves kegs into bars — that is a completely different trade. Different licences, different law.
What Does a Distributor Actually Do for You?
Strip out the industry language and the job breaks into six tasks.
1. Finding the item. Their catalogue access is wider than yours. 2. Getting it decorated. They know which factory prints cleanly on which surface. Glass, steel, neoprene, PVC and tin all take ink differently, and a bad match shows up on every unit. 3. Checking the artwork. They catch a 1 mm logo shift before 5,000 units run. 4. Chasing the order. Production slips. They chase it in the factory’s language and time zone. 5. Catching mistakes. A good one inspects before the container closes. 6. Getting it to your door. Freight, duty, and the last mile are usually inside their quote.
Task two is where the real knowledge sits. Watch what happens when your basket mixes hard surfaces: custom beer mugs, logo drink glasses, ceramic steins, glass growlers, neoprene can coolers, PVC bar mats and tin tackers all run through different print shops. A distributor who knows that saves you five rounds of samples. One who does not will find out on your order.
Retail-facing pieces run on a different logic again. Beer POSM, display stands and retail signage get built to a venue’s own dimensions, so a stock catalogue rarely fits the gap.
Going direct means rebuilding that map yourself. China’s bar wholesale markets are a reasonable place to start, but they are markets, not factories.
What they mostly do not do is make anything. If your item needs a new mould, a custom dye, or a bespoke weave, the distributor is still going to ask a factory. You are now paying two margins to talk to one production line.
How Do Promotional Products Distributors Make Money?
The base model is simple. They buy at net cost and sell at your price. The gap is the markup.
What sits inside that gap varies. ASI’s own vocabulary gives you the moving parts:
- Net cost — what the distributor pays the supplier.
- Coded pricing — the supplier’s price list, written in industry code so end-buyers cannot read it.
- QUR — “quote upon request.” No published price. You ask, they price it.
- EQP — “end quantity pricing.” The supplier honours the top quantity break on a small order. A real discount, and not always passed through.
- Decoration upcharges — per colour, per position, per unit.
- Rush charges — for anything faster than the standard slot.
Then there are the costs that are not on your line items at all: sample freight, artwork time, and the rep’s hours.
So the honest read of a distributor quote is this: you are not paying for the item. You are paying for someone else’s mistakes not reaching you.
That is a good trade on a 200-unit rush order. It is an expensive trade on a 20,000-unit reorder you have run four times.
How Big Is the Distributor Layer Right Now?
Worth knowing, because it shapes how they will behave in 2026.
PPAI’s 2025 estimate puts US distributor sales at $27.1 billion, the first year above $27 billion. Growth was 1.3%. That is below inflation, so the industry sold more dollars and roughly the same number of items.
The ten-year shape tells you where that came from. Distributor sales fell to $19.6 billion in 2020, then climbed back through $22.1 billion, $25.5 billion, $26.1 billion and $26.8 billion to reach 2025’s record.
Two details matter more than the headline.
The layer is mostly small firms. Distributors above $2.5 million in annual sales produced 54% of volume, or $14.6 billion. Those under $2.5 million produced 46%, or about $12.5 billion. Roughly half the money in this industry moves through small companies.
Online is now a core channel. Online sales hit $7.1 billion, or 26.3% of the total.
And the line that should shape how you negotiate. PPAI’s market economist Alok Bhat summarised 2025 this way: “Many distributors sold more but made less.” The report names the squeeze — tariffs and duties, freight and logistics costs, compliance costs, price competition, and client budget cuts.
Three things follow for you as a buyer:
- There is less slack in their margin than there used to be. Ask for what you want in writing, because a reprint is now a bigger ask than it was.
- Prices are moving. Pin the quote to a validity date before you build a budget on it.
- Your counterparty may be a small business. Check they can actually stand behind a bad batch, not just reorder it.
What Types of Promotional Products Distributors Are There?
Classify them by what they own. That tells you what they can actually control.
1. Full-service distributor
A rep manages your account end to end. Broad catalogue, deep supplier contacts.
Not for a single repeat item you already know inside out. You will pay for service you no longer need.
2. Self-serve platform
You pick, upload, and see a price on screen. No rep, no proof cycle.
Not for anything with a custom mould, a colour match, or a compliance question. The configurator cannot answer those.
3. Decorator-distributor
They own the print shop. Your decoration never leaves their building.
Not for categories outside their equipment. The moment they broker your job elsewhere, their advantage is gone.
4. Network rep
An independent owner trading under a bigger umbrella. Local contact, national buying power.
Not for a programme that needs one contract across several countries. The structure is local by design.
5. Import wholesaler
They buy containers, hold stock in your country, and sell in smaller lots. Specs are fixed. Ask for a different wall thickness on an insulated ice bucket or a different lining in a cooler bag and the answer is no.
Not for anything customised. Stock programmes mean you take what is on the shelf.
6. The “distributor” that is not one
Trading companies and sourcing agents in Asia get called distributors all the time. They are not. They sit on the supplier side of the line, and that changes who carries the risk.
Distributor or Factory Direct? Two Tables
Stop asking which route is cheaper. Ask who owns each job.
Who does what
| Route | Owns a factory? | Who decorates | Who books freight and pays duty | Who signs the safety certificate |
|---|---|---|---|---|
| US / EU distributor | No | Brokers it | Them | Usually them, as importer |
| Import wholesaler | No | Factory, before shipping | Them | Them |
| Trading company | Sometimes | Factory | You or them, check the Incoterm | Whoever is importer of record |
| Sourcing agent | No | Factory | You | You |
| Factory direct | Yes | Factory | You | You |
What it costs and how you pay
| Route | MOQ level | Payment | Cost band | Best for |
|---|---|---|---|---|
| Full-service distributor | Lowest | Net terms, invoiced | $$$–$$$$ | Mixed baskets, tight dates, no in-house buyer |
| Self-serve platform | Low | Card or invoice | $$–$$$ | Repeat small runs, standard items |
| Import wholesaler | Low, stock only | Invoiced | $$$ | Fast delivery on standard specs |
| Trading company | Medium | Deposit + balance | $$–$$$ | One invoice across many factories |
| Sourcing agent | High | Deposit + balance, plus fee | $$ | Finding and checking a factory |
| Factory direct | Highest | Deposit + balance | $ | Custom tooling, big volume, repeat programmes |
Cost bands above are a rough guide, not a promise. They describe the shape of the cost, not a quote.
When Should You Use a Distributor?
1. You need twelve different items on one invoice.
One purchase order, one delivery date, one person to chase. Say the basket is coasters, table tents, serving trays, napkin holders and bottle openers. That is five factories, five print methods and five packing lists. That coordination is genuinely worth paying for.
Or say it is an outdoor kit: canopy tents, patio umbrellas, branded seating and cooling gear for a festival. Four suppliers, one delivery window, one truck.
Not for a single item in a single colour. You are funding a service layer with nothing to coordinate.
2. The delivery date is under three weeks away.
Distributors hold slots with decorators that you cannot book cold. We have watched a promo campaign come down to the last ten days and survive only because someone had a decorator slot already booked.
Not for a date you set yourself. Move the date back a month and the premium disappears.
3. You have no one who can read a factory spec.
If nobody on your team can check a material call-out, buy the check. Materials are where the silent substitutions happen, and cork, silicone and paperboard are not interchangeable just because they are all “coasters.”
Not for teams that already write their own spec sheets. You will be paying to have your own work read back to you.
4. You want a physical sample before committing.
Good distributors sample fast because they carry the relationship cost of doing so.
Not for the fourth reorder of an item you have already approved twice.
When Should You Skip the Distributor and Buy Direct?
Going direct used to be seen as bad manners. Now it is normal, and the industry’s own numbers show it.
PPAI tracks suppliers that are not linked to PPAI, ASI or SAGE. In 2025 those suppliers moved about $4.4 billion, or 16.3% of all industry sales. Asked why they went outside, 20% of distributors said direct-from-overseas sites.
PPAI’s own economist does not call that a leak. Alok Bhat says big, well-planned orders often go straight to a factory. The buyer “bypass[es] parts of the traditional channel.” He calls it “not only a threat. It’s a growth opportunity.”
The catch sits in his next line. Winners pair factory prices with real checks: quality, certificates, decoration, shipping, and one person who answers for it all. Drop that second half and you have not saved money. You have moved the work onto your own desk.
So here is when the maths really does favour going direct.
1. The item needs new tooling.
A new mould, a custom profile, a bespoke weave. Every extra layer between you and the tool room adds cost and delay. A custom-shaped beer pitcher or a shaped tap handle has a tool room conversation baked into it. Have it with the people who own the tools.
Not for stock items printed one colour. There is no tooling to manage.
2. You are reordering something you have already proven.
The first order buys the knowledge. The fifth one should not buy it again.
Not for a changed spec. New material means new sampling, and that is worth a managed layer.
3. Volume is high enough that unit cost dominates.
At some order size, the markup costs more than the service saves. Run both quotes and look at the landed number.
Not for small mixed baskets. Freight and admin will swamp the unit saving.
4. You already have a freight forwarder and a QC process.
If you can move and inspect your own goods, the distributor’s biggest two services are things you already own.
Not for first-time importers. Freight and inspection are exactly where beginners lose money.
Who Is Liable If Something Goes Wrong?
This is the section the rest of the internet skips. It is also the one that matters.
In the United States, CPSC draws the line at the decoration. Its guidance for the promotional products industry says companies that import or make generic, undecorated goods are called suppliers. Companies that sell and deliver the decorated product to the final customer are called distributors.
Now the rule that catches people out. CPSC says a decoration can transform a plain product into a children’s product. Its own example is a piece of drinkware. If the print is meant to appeal mainly to children 12 or under, the item changes legal category.
That is not a small thing. A children’s product needs third-party lab testing and a Children’s Product Certificate. The certificate has to travel with every import shipment, and it has to reach your retailers and distributors.
So who signs it? CPSC’s answer: whoever in the chain finished the product. If a distributor directed the final production of a blank into a children’s product, the distributor is the responsible party. Not the factory. Not the brand.
Two consequences worth writing into your own paperwork:
- Ask in writing who issues the certificate. If the answer is “the factory,” that is not enough for a US import. The importer has to issue it, based on the lab results.
- A cute print is a compliance decision. A cartoon on a tumbler can move it into a different legal category.
In the European Union, the trap runs the other way. Under the General Product Safety Regulation, an importer is anyone established in the EU who puts a product from a third country on the EU market. A distributor is anyone in the chain who is neither the maker nor the importer.
Read those two together. If you are a European distributor buying from China, you are not a distributor under this law. You are the importer. Importers carry the heavier duties: verifying technical files, keeping them ten years, and putting their own name and contact on the product.
Every consumer product also needs a responsible economic operator inside the EU. Promotional giveaways count. This is the line item most branded-merch orders forget, and it lands on whoever put the goods on the market — not on the factory that made them.
How Do You Vet a Promotional Products Distributor?
Eight checks. Run them before the purchase order, not after.
1. Ask for their ASI or PPAI number and look it up. Membership is not a quality badge, but it does mean a traceable business identity. 2. Ask which factory will make your item. A distributor who cannot say is a distributor who cannot fix a problem. 3. Ask whether they decorate in-house or broker it. Brokered means one more hand on your artwork. 4. Get a physical sample of your actual spec. Not a similar item. Yours. 5. Ask who signs the safety certificate. Get the answer in the quote, not in an email three weeks later. 6. Ask how long the quote holds. Prices moved on tariffs and freight through 2025. A quote without a validity date is not a quote. 7. Ask what happens if duties change. Good distributors now state their duty assumptions. A vague answer means you find out on the invoice. 8. Ask for the inspection report before the container ships. If inspection is not offered, you are buying blind.
Five of those eight are questions you should also put to a factory. The wording barely changes.
What Should You Send to Get a Quote?
Distributors quote fast when the brief is tight. Send these five things and you will get a number back in a day instead of a week.
- The item and quantity, with your target date.
- Your artwork, as vector if you have it.
- Print positions and colours. Per position, per colour.
- The material you expect, not just the category. “Steel” is a spec. “A nice tumbler” is not. Material is the one line that decides what arrives, and it is the line most quotes leave blank.
- Where it ships, and whether you need it duty paid.
Skip the last one and you will get a quote you cannot compare with anything.
FAQ
Is a distributor the same as a supplier?
No. Suppliers make or import the blank product and sell to distributors. Distributors sell the decorated product to you. CPSC uses the same split in its own guidance.
Can I buy straight from a supplier?
Sometimes. Many suppliers sell only to distributors with a membership number. Others will sell direct. Ask before you assume either way, and budget time for finding the supplier yourself if you go that route.
What is an ASI number?
A unique ID issued to ASI member companies. Suppliers use it to check they are selling to a real distributor at wholesale, not to the public.
Do distributors have minimum order quantities?
Yes, but theirs are usually the lowest of any route. That is one of the main reasons to use one.
How much do distributors mark up?
There is no standard figure, and anyone quoting a single percentage is guessing. Markup moves with the item, the decoration, the rush, and the freight. Ask for the landed price and compare routes.
What is the difference between a distributor and a wholesaler?
A distributor usually sells a customised, per-project order. A wholesaler holds stock and sells in lots. The line blurs, because plenty of companies do both.
Do distributors handle shipping and customs?
Usually yes, and that is often the biggest thing you are buying. Confirm which Incoterm the quote is built on before you compare it with a factory price.
Who is responsible if a promotional product is recalled?
Whoever the law says finished the product. In the US that can be the distributor, not the factory. In the EU it is likely the importer. Every party in the chain also has a duty to report an unsafe product.
Can a distributor be the importer of record?
Yes, and often is. Ask. That single answer tells you who holds the certificate obligation.
Do I need a distributor to import from China?
No. You need an importer of record, and that can be you. Plenty of brands source beer promotional products from China on their own. Distributors earn their fee on coordination, not on customs.
How do I become a promotional products distributor?
You need three things: industry knowledge, supplier relationships, and a membership that lets suppliers sell to you at net. Most people start with the third and discover the second is the hard part. Your supply base is the business, and building that base is the work.
Are distributors only for big companies?
No. PPAI’s 2025 estimate found distributors under $2.5 million in annual sales accounted for 46% of industry volume. Small buyers are the norm, not the exception.
What if I only need 100 units?
Use a distributor or a self-serve platform. Below a few hundred units, factory-direct freight and admin cost more than the goods, and most factory MOQs start well above that anyway.
What Should You Do Next?
Run one order each way and compare the landed numbers.
Take your next repeat item — the one you buy every quarter — and get two quotes. One from your distributor, one direct from a factory. Compare the unit price, the freight, and the certificate together. That single comparison tells you more than any article can.
If you want the factory side of that comparison, send us the spec. We are a beer-only promo supplier — see the brands we work with — and we make custom barware, ice buckets, cooler bags and the rest of the branded promotional items range. We will also tell you plainly when a distributor is the better call for your order.



