Custom Promotional Games and Beer Pong Tables for Beer Brands
Games hold a crowd in your footprint for twenty minutes instead of twenty seconds. BeerPromoPro is a China-based manufacturer and wholesale supplier of custom promotional games — beer pong tables, cornhole sets, flip cup and scoreboards — built for breweries, distributors and festival agencies. Order in bulk and let one production run supply every outlet on your activation schedule.
OUR PRODUCT
Choose the Right Custom Promotional Game for Your Program
Pick the game by floor space, how wet it gets, and who resets it between rounds.
Regulation-Size Beer Pong Tables
Tournament dimensions are 8 ft x 2 ft x 27.5 in (2438 x 610 x 700 mm) with a ten-cup triangle at each end. An aluminum perimeter frame around a 12 to 15 mm core keeps the top flat and lets the legs lock with tabs. Aluminum builds weigh around 8.8 kg and carry by the molded side handles.
Compact and Folding Beer Pong Tables
Six-foot versions run about 1830 x 610 mm and fold to roughly 600 x 600 x 140 mm with a latch and carry handle built into the shell. They suit bars with shallow storage and brands shipping to fifty outlets. The shorter surface makes the game easier — acceptable for casual play, wrong for a ranked event.
Regulation Cornhole Board Sets
Regulation boards measure 24 x 48 in with a 12 to 15 mm plywood top, a 6 in hole centered 9 in from the top edge and 12 in from each side, standing 3 to 4 in at the front and 12 in at the rear. A set is two boards plus eight 6 x 6 in bags. Specify resin-filled bags, not corn.
Flip Cup, Ring Toss and Tabletop Game Sets
Smaller formats travel where a table cannot: flip cup racks for six cups a side, bottle-top ring toss on a 400 mm base, and 40 mm birch dice towers. They pack flat in a mailer under 3 kg and reset in seconds. They need a table that already exists — if your venue has none, budget for one.
Branded Scoreboards, Cup Racks and Referee Kits
Scoreboards run A3 (297 x 420 mm) dry-wipe with a clipped marker, or 600 x 400 mm folding boards that stand behind the table. Cup racks hold ten per side in formed ABS so cups arrive uncrushed, and clips keep balls off the floor. These are the low-cost pieces that make an activation look planned rather than improvised.
Transport Cases and Event Game Kits
A folded regulation table measures about 600 x 600 x 140 mm and ships at 9 to 13 kg depending on frame and top. 600D cases with a padded strap and a printed panel turn the table into something a brand ambassador carries through an airport. Cornhole pairs ship flat near 1250 x 640 x 200 mm.
TAG
Branding and Customization
A printed game fails in two places every time: where players slide things, and any edge the panel folds around.
Full-Color UV Printing on Finished Surfaces
UV-cured ink lays down on laminate, plywood and ABS in one pass and cures instantly, so a photographic full bleed costs the same as one flat color. Ink sits above the substrate, though, and a sliding cup will scuff it unless covered by a clear topcoat.
Print-and-Laminate Playing Surfaces
The graphic prints face up, then bonds under a 0.1 to 0.2 mm PVC or PET film with a matte texture. That film takes the spill, not the ink. We specify it for every playing surface, and even then the fold seam is where water gets in.
Sublimation Fabric Covers and Bag Panels
Table throws, carry-case panels and zone flags print by sublimation onto 180 to 250 gsm polyester, then finish with elastic corners or hook-and-loop tape. They machine wash at 30 degrees and the print never peels. Keep large white areas out of the design — spilled beer stains fabric permanently.
Screen Printing on Wood, Bags and Balls
Flat spot colors on boards, drawstring bags and ping pong balls screen print cleanly and sit thinner than a wrap, which matters where bags slide across the hole. Expect one setup per color per item, about ±1.5 mm registration, and a coarser mesh on curved ball surfaces.
Laser Engraving and Debossed Detail
Engraving burns into birch and bamboo at about 0.5 to 1 mm depth, leaving a single-tone mark that spilled beer cannot remove. Debossing presses into leatherette wraps and padded case panels. Neither delivers brand color, and both lose any line thinner than roughly 1 mm, so simplify fine type first.
Decide How Wet It Gets Before You Pick a Material
Beer pong is a wet game, and where the set lives between uses decides the material — a dry storeroom, a cellar, or a damp van. A laminate over an MDF core survives the spill but fails at the fold seam and the edge band, which is where water enters and the board swells beyond recovery. If the table sits outdoors through a wet season, MDF-core is the wrong choice at any laminate thickness: specify an aluminum frame with a high-pressure laminate or HDPE top, or accept a two-season service life and plan the replacement. Then check the floor — a regulation table plus two players needs roughly 3 m x 2.5 m clear. Finally decide whether play must be tournament-legal; that fixes the dimensions and removes every compact option.
What to Send for a Quote That Matches the Invoice
Send the game type, finished dimensions or the regulation you must meet, pieces per set, number of sets, whether sets need retail boxes or bulk cartons, vector artwork with Pantone references, and the destination port. Unit price moves with frame gauge and whether legs fold on locking tabs, core material, print coverage, topcoat, and anything assembled before packing. Accessories hide weight: eight filled bags add about 3.5 kg to a cornhole pair. Freight is its own line — a folded table packs near 600 x 600 x 140 mm while a cornhole pair runs 1250 x 640 x 200 mm, so air freight rarely pays on these items and sea consolidation usually does. Allow seven days for a sample and twenty-five to thirty-five days for bulk before shipping from China.
Frequently Asked Questions About Custom Promotional Games
Most printed game programs start at 50 to 100 sets per design, or around 30 sets on stock blanks with decoration. Cornhole pairs begin at 100 sets because of board tooling, and cups, balls and scoreboards at 200 pieces. Each piece in a mixed set carries its own minimum.
A folding beer pong table runs USD 45 to 120, and an aluminum-frame regulation build USD 90 to 180. Cornhole pairs fall between USD 55 and 180 depending on board thickness and print coverage, and tabletop games between USD 4 and 15. New tooling is quoted separately.
Yes, and a physical sample takes about seven days. Set up cups, spill a full cup across the seam and leave it overnight, then check whether the edge band lifted. For cornhole, throw twenty bags and inspect the hole rim — that is where print damage starts, not the flat face.
The laminate film takes spills on the face, but the fold seam and edge band do not. Beer wicks into a cut board edge within about twenty minutes and the swelling is permanent — an MDF top that has swollen never lies flat again, so dry the seam and store the table closed.
Yes — regulation tables measure 8 ft x 2 ft x 27.5 in (2438 x 610 x 700 mm) with a ten-cup triangle at each end. Tell us which ruleset governs your event before we confirm the build, because published dimensions vary by a centimeter or two and some bodies also specify ball diameter.
A physical sample takes about seven days and bulk production twenty-five to thirty-five days after approval. Games are bulky more than heavy, so we ship from China by sea consolidation to Europe and Latin America, with air available when a launch date leaves no room for thirty days afloat.